feat!: Move to AstroNvim v4 distributed through lazy.nvim

lua/config/lazy.lua

@@ -0,0 +1,44 @@
+local lazypath = vim.fn.stdpath "data" .. "/lazy/lazy.nvim"
+if not vim.loop.fs_stat(lazypath) then
+  -- stylua: ignore
+  vim.fn.system({ "git", "clone", "--filter=blob:none", "https://github.com/folke/lazy.nvim.git", "--branch=stable",
+    lazypath })
+end
+vim.opt.rtp:prepend(vim.env.LAZY or lazypath)
+
+-- TODO: set to true on release
+local USE_STABLE = false -- use stable releases of AstroNvim
+
+local spec = {
+  -- TODO: remove branch v4 on release
+  { "AstroNvim/AstroNvim", branch = "v4", version = USE_STABLE and "*" or nil, import = "astronvim.plugins" },
+}
+if USE_STABLE then table.insert(spec, { import = "astronvim.lazy_snapshot" }) end -- pin plugins to known stable versions/commits
+
+require("lazy").setup {
+  spec = vim.list_extend(spec, {
+    -- AstroCommunity import any community modules here
+    -- { "AstroNvim/astrocommunity" },
+    -- { import = "astrocommunity.pack.lua" },
+    { import = "plugins" }, -- import/override with your plugins
+  }),
+  defaults = {
+    -- By default, only AstroNvim plugins will be lazy-loaded. Your custom plugins will load during startup.
+    -- If you know what you're doing, you can set this to `true` to have all your custom plugins lazy-loaded by default.
+    lazy = true,
+  },
+  install = { colorscheme = { "astrodark", "habamax" } },
+  checker = { enabled = false }, -- automatically check for plugin updates
+  performance = {
+    rtp = {
+      -- disable some rtp plugins, add more to your liking
+      disabled_plugins = {
+        "gzip",
+        "netrwPlugin",
+        "tarPlugin",
+        "tohtml",
+        "zipPlugin",
+      },
+    },
+  },
+}

lua/config/options.lua

@@ -0,0 +1,10 @@
+-- Options are automatically loaded before lazy.nvim startup
+-- Default options that are always set: https://github.com/AstroNvim/AstroNvim/blob/main/lua/astronvim/options.lua
+-- Add any additional options here
+vim.opt.relativenumber = true -- sets vim.opt.relativenumber
+vim.opt.number = true -- sets vim.opt.number
+vim.opt.spell = false -- sets vim.opt.spell
+vim.opt.signcolumn = "auto" -- sets vim.opt.signcolumn to auto
+vim.opt.wrap = false -- sets vim.opt.wrap
+
+vim.g.mapleader = " " -- sets vim.g.mapleader

lua/config/polish.lua

@@ -0,0 +1,16 @@
+-- This file is automatically ran last in the setup process and is a good place to configure
+-- augroups/autocommands and custom filetypes also this just pure lua so
+-- anything that doesn't fit in the normal config locations above can go here
+
+-- Set up custom filetypes
+-- vim.filetype.add {
+--   extension = {
+--     foo = "fooscript",
+--   },
+--   filename = {
+--     ["Foofile"] = "fooscript",
+--   },
+--   pattern = {
+--     ["~/%.config/foo/.*"] = "fooscript",
+--   },
+-- }

lua/plugins/astrocore.lua

@@ -0,0 +1,42 @@
+return {
+  "AstroNvim/astrocore",
+  opts = {
+    features = {
+      max_file = { size = 1024 * 100, lines = 10000 }, -- set global limits for large files for disabling features like treesitter
+      autopairs = true, -- enable autopairs at start
+      cmp = true, -- enable completion at start
+      highlighturl = true, -- highlight URLs at start
+      notifications = true, -- enable notifications at start
+    },
+    -- Mapping data with "desc" stored directly by vim.keymap.set().
+    --
+    -- Please use this mappings table to set keyboard mapping since this is the
+    -- lower level configuration and more robust one. (which-key will
+    -- automatically pick-up stored data by this setting.)
+    mappings = {
+      -- first key is the mode
+      n = {
+        -- second key is the lefthand side of the map
+        -- mappings seen under group name "Buffer"
+        ["<leader>bn"] = { "<cmd>tabnew<cr>", desc = "New tab" },
+        ["<leader>bD"] = {
+          function()
+            require("astronvim.utils.status").heirline.buffer_picker(
+              function(bufnr) require("astronvim.utils.buffer").close(bufnr) end
+            )
+          end,
+          desc = "Pick to close",
+        },
+        -- tables with just a `desc` key will be registered with which-key if it's installed
+        -- this is useful for naming menus
+        ["<leader>b"] = { desc = "Buffers" },
+        -- quick save
+        -- ["<C-s>"] = { ":w!<cr>", desc = "Save File" },  -- change description but the same command
+      },
+      t = {
+        -- setting a mapping to false will disable it
+        -- ["<esc>"] = false,
+      },
+    },
+  },
+}

lua/plugins/astrolsp.lua

@@ -0,0 +1,39 @@
+return {
+  "AstroNvim/astrolsp",
+  opts = {
+    -- Diagnostics configuration (for vim.diagnostics.config({...})) when diagnostics are on
+    diagnostics = {
+      virtual_text = true,
+      underline = true,
+    },
+    -- customize lsp formatting options
+    formatting = {
+      -- control auto formatting on save
+      format_on_save = {
+        enabled = true, -- enable or disable format on save globally
+        allow_filetypes = { -- enable format on save for specified filetypes only
+          -- "go",
+        },
+        ignore_filetypes = { -- disable format on save for specified filetypes
+          -- "python",
+        },
+      },
+      disabled = { -- disable formatting capabilities for the listed language servers
+        -- disable lua_ls formatting capability if you want to use StyLua to format your lua code
+        -- "lua_ls",
+      },
+      timeout_ms = 1000, -- default format timeout
+      -- filter = function(client) -- fully override the default formatting function
+      --   return true
+      -- end
+    },
+    -- enable servers that you already have installed without mason
+    servers = {
+      -- "pyright"
+    },
+    -- customize language server configuration options passed to `lspconfig`
+    config = {
+      -- clangd = { capabilities = { offsetEncoding = "utf-8" } },
+    },
+  },
+}

lua/plugins/astroui.lua

@@ -0,0 +1,14 @@
+return {
+  "AstroNvim/astroui",
+  opts = {
+    colorscheme = "astrodark", -- change colorscheme
+    highlights = {
+      init = { -- this table overrides highlights in all themes
+        -- Normal = { bg = "#000000" },
+      },
+      duskfox = { -- a table of overrides/changes to the duskfox theme
+        -- Normal = { bg = "#000000" },
+      },
+    },
+  },
+}

lua/plugins/core.lua

@@ -0,0 +1,77 @@
+return {
+  -- customize alpha options
+  {
+    "goolord/alpha-nvim",
+    opts = function(_, opts)
+      -- customize the dashboard header
+      opts.section.header.val = {
+        " █████  ███████ ████████ ██████   ██████",
+        "██   ██ ██         ██    ██   ██ ██    ██",
+        "███████ ███████    ██    ██████  ██    ██",
+        "██   ██      ██    ██    ██   ██ ██    ██",
+        "██   ██ ███████    ██    ██   ██  ██████",
+        " ",
+        "    ███    ██ ██    ██ ██ ███    ███",
+        "    ████   ██ ██    ██ ██ ████  ████",
+        "    ██ ██  ██ ██    ██ ██ ██ ████ ██",
+        "    ██  ██ ██  ██  ██  ██ ██  ██  ██",
+        "    ██   ████   ████   ██ ██      ██",
+      }
+      return opts
+    end,
+  },
+  -- You can disable default plugins as follows:
+  -- { "max397574/better-escape.nvim", enabled = false },
+  --
+  -- You can also easily customize additional setup of plugins that is outside of the plugin's setup call
+  -- {
+  --   "L3MON4D3/LuaSnip",
+  --   config = function(plugin, opts)
+  --     require "plugins.configs.luasnip"(plugin, opts) -- include the default astronvim config that calls the setup call
+  --     -- add more custom luasnip configuration such as filetype extend or custom snippets
+  --     local luasnip = require "luasnip"
+  --     luasnip.filetype_extend("javascript", { "javascriptreact" })
+  --   end,
+  -- },
+  -- {
+  --   "windwp/nvim-autopairs",
+  --   config = function(plugin, opts)
+  --     require "plugins.configs.nvim-autopairs"(plugin, opts) -- include the default astronvim config that calls the setup call
+  --     -- add more custom autopairs configuration such as custom rules
+  --     local npairs = require "nvim-autopairs"
+  --     local Rule = require "nvim-autopairs.rule"
+  --     local cond = require "nvim-autopairs.conds"
+  --     npairs.add_rules(
+  --       {
+  --         Rule("$", "$", { "tex", "latex" })
+  --           -- don't add a pair if the next character is %
+  --           :with_pair(cond.not_after_regex "%%")
+  --           -- don't add a pair if  the previous character is xxx
+  --           :with_pair(
+  --             cond.not_before_regex("xxx", 3)
+  --           )
+  --           -- don't move right when repeat character
+  --           :with_move(cond.none())
+  --           -- don't delete if the next character is xx
+  --           :with_del(cond.not_after_regex "xx")
+  --           -- disable adding a newline when you press <cr>
+  --           :with_cr(cond.none()),
+  --       },
+  --       -- disable for .vim files, but it work for another filetypes
+  --       Rule("a", "a", "-vim")
+  --     )
+  --   end,
+  -- },
+  -- By adding to the which-key config and using our helper function you can add more which-key registered bindings
+  -- {
+  --   "folke/which-key.nvim",
+  --   config = function(plugin, opts)
+  --     require "plugins.configs.which-key"(plugin, opts) -- include the default astronvim config that calls the setup call
+  --     -- Add bindings which show up as group name
+  --     local wk = require "which-key"
+  --     wk.register({
+  --       b = { name = "Buffer" },
+  --     }, { mode = "n", prefix = "<leader>" })
+  --   end,
+  -- },
+}

lua/plugins/mason.lua

@@ -0,0 +1,36 @@
+-- customize mason plugins
+return {
+  -- use mason-lspconfig to configure LSP installations
+  {
+    "williamboman/mason-lspconfig.nvim",
+    -- overrides `require("mason-lspconfig").setup(...)`
+    opts = function(_, opts)
+      -- add more things to the ensure_installed table protecting against community packs modifying it
+      opts.ensure_installed = require("astrocore.utils").list_insert_unique(opts.ensure_installed, {
+        -- "lua_ls",
+      })
+    end,
+  },
+  -- use mason-null-ls to configure Formatters/Linter installation for null-ls sources
+  {
+    "jay-babu/mason-null-ls.nvim",
+    -- overrides `require("mason-null-ls").setup(...)`
+    opts = function(_, opts)
+      -- add more things to the ensure_installed table protecting against community packs modifying it
+      opts.ensure_installed = require("astrocore.utils").list_insert_unique(opts.ensure_installed, {
+        -- "prettier",
+        -- "stylua",
+      })
+    end,
+  },
+  {
+    "jay-babu/mason-nvim-dap.nvim",
+    -- overrides `require("mason-nvim-dap").setup(...)`
+    opts = function(_, opts)
+      -- add more things to the ensure_installed table protecting against community packs modifying it
+      opts.ensure_installed = require("astrocore.utils").list_insert_unique(opts.ensure_installed, {
+        -- "python",
+      })
+    end,
+  },
+}

lua/plugins/null-ls.lua

@@ -0,0 +1,17 @@
+return {
+  "jose-elias-alvarez/null-ls.nvim",
+  opts = function(_, config)
+    -- config variable is the default configuration table for the setup function call
+    -- local null_ls = require "null-ls"
+
+    -- Check supported formatters and linters
+    -- https://github.com/jose-elias-alvarez/null-ls.nvim/tree/main/lua/null-ls/builtins/formatting
+    -- https://github.com/jose-elias-alvarez/null-ls.nvim/tree/main/lua/null-ls/builtins/diagnostics
+    config.sources = {
+      -- Set a formatter
+      -- null_ls.builtins.formatting.stylua,
+      -- null_ls.builtins.formatting.prettier,
+    }
+    return config -- return final config table
+  end,
+}

lua/plugins/treesitter.lua

@@ -0,0 +1,9 @@
+return {
+  "nvim-treesitter/nvim-treesitter",
+  opts = function(_, opts)
+    -- add more things to the ensure_installed table protecting against community packs modifying it
+    opts.ensure_installed = require("astrocore.utils").list_insert_unique(opts.ensure_installed, {
+      -- "lua"
+    })
+  end,
+}

lua/plugins/user.lua

@@ -0,0 +1,12 @@
+return {
+  -- You can also add new plugins here as well:
+  -- Add plugins, the lazy syntax
+  -- "andweeb/presence.nvim",
+  -- {
+  --   "ray-x/lsp_signature.nvim",
+  --   event = "BufRead",
+  --   config = function()
+  --     require("lsp_signature").setup()
+  --   end,
+  -- },
+}